콘텐츠로 건너뛰기
Home » illy y3.3 machine failure, flashing

illy y3.3 machine failure, flashing

If the dispensing buttons and flash alternately, the machine must be descaled.
It starts automatically when you press the button, but there are some things you need to prepare in advance. Total cycle time is 8 minutes. If the process is interrupted due to a power outage or any other reason, you must turn the machine off and on again and start from the beginning.

illy y3.3 machine failure, flashing
Descaling is needed.

Illy advises using descaling products for coffee machines, but if you don’t have one, you can just use water.

  1. Remove the capsule.
  2. Fill the water tank.
  3. Since a lot of water is used for cleaning, prepare a container of at least 0.75 liters. A bowl or stainless steel bowl is good.

** Do not use vinegar, lye, salt or formic acid as they damage the machine.

  1. Place a container larger than 0.75 liters with the power turned off. If the container is large and difficult to place on the floor, you can fold a dishtowel to make it level with the floor.
  2. When you turn on the power, the button flashs left and right. Press the espresso button for more than 3 seconds within 15 seconds.
  3. Only the Americano button will flash.
Only the Americano button will blink.
When the Americano button flashs, it’s ready.

Stage 1 from here!

4. When you press the Americano button, stage 1 begins. The Americano button flashs rapidly and the action of dispensing water and stopping is repeated.

the action of dispensing water and stopping is repeated.
Stage 1 in progress.

5. When stage 1 is completed, the espresso button turns on and the Americano button flashs.
About 400ml of water was used in the first stage of work. If the capacity of the container is insufficient, empty the water and prepare an empty container again.

When step 1 is completed
Stage 1 completed.
About 400ml of water was used
About 400ml of water was used.

Stage 2 from here!

  1. Refill the water tank.
  2. Place the container and press the Americano button to begin the second stage of cleaning.
    In the second stage, water is dispensed without stopping. A similar volume of water comes out as in stage 1.
    I thought I was done with stage 1, so I put the capsule in and the coffee water came out, but it didn’t matter.
    Since we are cleaning the inside of the machine, the end part where the nozzle and capsule are are not very meaningful.
Stage 2 in progress.
Stage 1 in progress.

8. When stage 2 is completed, the espresso button and the Americano button flash simultaneously. Wait until the both buttons become steady on.
The machine is now ready for use.

When both buttons become steady on, you're done. I accidentally left the capsule...
When both buttons become steady on, you’re done. I accidentally left the capsule…

9. Just insert the capsule and brew delicious coffee as you normally would.

“이 포스팅은 쿠팡 파트너스 활동의 일환으로, 이에 따른 일정액의 수수료를 제공받습니다.”

답글 남기기

이메일 주소는 공개되지 않습니다. 필수 필드는 *로 표시됩니다